7
8
●
To fit the rear panel/splashback, slide
the lugs on the bottom of the panel into
the matching slots on rear of stove and
fix with screws provided.
Take out and wash the oven fittings with warm water and a little washing-
up liquid.
Switch on the ventilation in the room or open a window.
Heat the oven (to a temperature of 250
°
C, for approx. 30 min.), remove any stains and
When heating the oven for the first time
it
is
normal
for
the
stove
to
give
off
smoke
and
manufacturing
odours
.
These
will
disappear
after
about
30
Remove
packaging
and
empty
the
drawer
.
Clean
the
interior
of
the
oven
with
Minutes
.
warm
soapy
water
and
wipe
clean
with
moistened
cloth or sponge
.
Wipe
clean
the
wash carefully
.
The
hotplates
should
be
heated
for
around
4
minutes
without
a pan or pot on them
.
cooktop
.
Choose a pan with a diameter that is at least as large as the heating zone.Do not use
pans with a concave or convex base.Always remember or put a proper cover on the
pan.We recommend the use of pans with thick,even bases.
If the heating zones and pans are solied it is impossible to make full use of the heat.
Coating or veneer used on fitted
furniture must be applied with a heat
resistant adhesive (100
℃
). This
prevents surface deformation or
detachment of the coating. If you
resistance, you should leave
approximately 2 cm of free a space
around the cooker. The wall behind
the cooker should be resistant to
high temperatures.During operation,
its back side can warm up to around
665500m
mm
m((m
miinn))
2cm
2cm
2cm
are unsure of your furniture’s heat
Fix the cooker to the back wall
with 2 chains
Before you start using the cooker it should
distribution in a frying
fat
pan. To this
removal of the drawer. The adjustment range is +/-5mm.
The cooker should stand on a hard,
even floor (do not put it on a base.)
The
kitchen
where the appliance is to
be installed must be dry and well
ventilated.
The
room
should
be
equipped
with
a
ventilation
system
that
pipes
away
exhaust
fumes
created
during
combustion.
This
system
should
consist
of
a
ventilation
grid
or
hood.
Hoods
should
be
installed
according
to
the
manufacturer
'
s
instructions.
The
cooker
should
be
placed
so
as
to
ensure
free
access
to
all
control
elements.
be leveled,which is particularly Important for
purpose,adjustable feet are accessible after
