AP-120-MNT-CV Access Point Enclosure
| Installation Guide
3
2. With the hook on the base facing away from the wall, pull the ethernet cables through the holes on
either side of the base. Hold the cable down and out of the way.
3. Place the AP into the base (
Figure 3
). Place the top AP into the hooks on the base and align the back
of the AP with the large opening in the base.
Figure 3
AP installed in the base
4. Connect the ethernet cable or cables to the AP (
Figure 4
). Ensure that the cables do not obstruct any
of the connection points between the base and the cover.
Figure 4
Cable path
AP120_003
AP120_005