Aruba EC-10104 SD-WAN Gateway
| Installation Guide
Installation |
15
When installing an EC-10104 SD-WAN Gateway into a two-post 19-inch Telco rack with the rear panel
outwards, the DC cable should be routed through the outlet hole provided on the rack panel.
10.Remove the cable grommet from the outlet hole and insert the DC cable into the cable grommet
through the slit provided. See
.
Figure 15
Routing the DC Cable through the Outlet Hole
11.Reinsert the cable grommet into the outlet hole on the rack mount tray. See
.
Figure 16
Inserting the DC cable into the Cable Grommet
12.Connect the DC cable into the DC jack on the device.
Rack mount installation of the EC-10104 SD-WAN Gateway is now complete.