Aruba EdgeConnect 10104 SD-WAN Gateway
| Installation Guide
Specifications, Safety, and Compliance |
18
Chapter 4
Specifications, Safety, and
Compliance
Aruba EdgeConnect 10104 SD-WAN Gateway Specifications
Physical
Device Dimensions (HxWxD): 3.82 cm x 19.85cm x 15.31 cm
Device Weight: 2.519 lbs (1.143 kg)
Electrical
Ethernet
4 x 100/1000BASE-T auto-sensing Ethernet RJ-45 Interfaces
MDI/MDX
Power
12V DC power interface, supports powering through an 12V DC, 2.5A AC-to-DC power adapter.
Environmental
Operating
Temperature Range: 0 °C to 40 °C (32 °F to 104 °F)
Humidity Range: 10% to 90% (RH), non-condensing
Storage and Transportation
Temperature Range: –40 °C to 70 °C (–40 °F to 158 °F)
Humidity Range: 10% to 95% (RH), non-condensing
For additional specifications on this product, please refer to the data sheet. The data sheet can be
found at
www.arubanetworks.com
Safety and Regulatory Compliance
Aruba, a Hewlett Packard Enterprise company provides a multi-language document that contains
country-specific restrictions and additional safety and regulatory information for all Aruba products.
This document can be viewed or downloaded from the following location:
FCC Class B Part 15
This device complies with Part 15 of the Federal Communications Commission (FCC) Rules.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in a commercial environment.
Aruba gateways must be installed by a professional installer. The professional installer is responsible for
ensuring that grounding is available and it meets applicable local and national electrical codes.
