background image

Aruba EC-10104 SD-WAN Gateway

| Installation Guide

|

3

Contents

Preface .................................................................................................. 4

Guide Overview......................................................................................................... 4
Contacting Support .................................................................................................. 4

EC-10104 SD-WAN Gateway................................................................. 5

Package Checklist ..................................................................................................... 5
Aruba EdgeConnect 10104 SD-WAN Gateway Components............................... 6

Installation ........................................................................................... 9

Installation Recommendations............................................................................... 9
Precautions................................................................................................................ 9
Cable Saddle Installation Instructions .................................................................10
Wall-Mounting Installation Instructions...............................................................11
Rack Mounting Installation Instructions ..............................................................12

Configuring the Gateway .................................................................. 16

Install the Gateway into the Network ..................................................................16
Connect Power Cords ............................................................................................16
Turn the Power On .................................................................................................16
Approve the Discovered Appliance (Gateway)....................................................17
Complete the Appliance Manager Configuration Wizard..................................17

Specifications, Safety, and Compliance .......................................... 18

Aruba EdgeConnect 10104 SD-WAN Gateway Specifications ...........................18
Safety and Regulatory Compliance ......................................................................18
Proper Disposal of Aruba Equipment ..................................................................20

Summary of Contents for EC-10104





















Reviews: