In the Instant UI
1. Click the
Wired
link under
More
in the Instant main window. The
Wired
window is displayed.
2. In the
Wired
window, select the wired profile to modify.
3. Click
Edit
. The
Edit Wired Network
window is displayed.
4. In the
Wired Settings
tab, select
Enabled
from the
Content Filtering
drop-down list, and click
Next
to
continue.
In the CLI
To enable content filtering for a wired profile in the CLI:
(Instant AP)(config)# wired-port-profile test
(Instant AP)(wired ap profile <name>)# content-filtering
(Instant AP)(wired ap profile <name>)# end
(Instant AP)# commit apply
Configuring Enterprise Domains
The enterprise domain names list displays the DNS domain names that are valid on the enterprise network.
This list is used to determine how client DNS requests must be routed. When
Content Filtering
is enabled, the
DNS request of the clients is verified and the domain names that do not match the names in the list are sent to
the OpenDNS server.
You can configure an enterprise domain through the Instant UI or the CLI.
In the Instant UI
To manually add a domain:
1. Navigate to
System > General
and click
Show advanced options > Enterprise Domains
. The
Enterprise Domain
tab contents are displayed.
2. Click
New
and enter a
New Domain Name
. Using asterisk (*) as an enterprise domain causes all DNS
traffic to go through the tunnel to the original DNS server of clients. If you are configuring routing profile
with split-tunnel disabled, you need to add asterisk (*) to the enterprise domain list.
3. Click
OK
to apply the changes.
To delete a domain, select the domain and click
Delete
. This will remove the domain name from the list.
In the CLI
To configure an enterprise domain:
(Instant AP)(config)# internal-domains
(Instant AP)(domain)# domain-name <name>
(Instant AP)(domain)# end
(Instant AP)# commit apply
Configuring URL Filtering Policies
You can configure URL filtering policies to block certain categories of websites based on your organization
specifications by defining ACL rules either through the Instant UI or the CLI.
In the Instant UI
To control access based on web categories and security settings:
1. Navigate to
Security > Roles
.
2. Select any WLAN SSID or wired profile role, and click
New
in the Access Rules section. The New Rule window
appears.
3. Select
Access Control
from the
Rule Type
drop-down list.
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
Roles and Policies |
196
