To configure MAC authentication with captive portal authentication for a wired profile:
(Instant AP)(config)# wired-port-profile <name>
(Instant AP)(wired ap profile <name>)# type <guest>
(Instant AP)(wired ap profile <name>)# mac-authentication
(Instant AP)(wired ap profile <name>)# captive-portal <type>
(Instant AP)(wired ap profile <name>)# captive-portal {<type> [exclude-uplink <types>]
|external [Profile <name>] [exclude-uplink <types>]}
(Instant AP)(wired ap profile <name>)# set-role-mac-auth <mac-only>
(Instant AP)(wired ap profile <name>)# end
(Instant AP)# commit apply
Configuring WISPr Authentication
Instant supports the following smart clients:
n
iPass
n
Boingo
These smart clients enable client authentication and roaming between hotspots by embedding iPass Generic
Interface Specification (GIS)
redirect
,
authentication
, and
logoff
messages within HTML messages that are sent
to the IAP.
Wireless Internet Service Provider roaming (WISPr) authentication is supported only for the
Internal -
Authenticated
and
External - RADIUS Server
captive portal authentication. Select the
Internal –
Authenticated
or the
External - RADIUS Server
option from the
Splash page type
drop-down list to
configure WISPr authentication for a WLAN profile.
You can configure WISPr authentication using the Instant UI or the CLI.
In the Instant UI
1. Click the
System
link located directly above the Search bar in the Instant main window. The
System
window is displayed.
2. Click
Show advanced options
.
3. Click
WISPr
tab. The
WISPr
tab contents are displayed. The following figure shows the
WISPr
tab contents:
Figure 36
Configuring WISPr Authentication
4. Enter the ISO Country Code for the WISPr Location ID in the
ISO country code
text box.
5. Enter the E.164 Area Code for the WISPr Location ID in the
E.164 area code
text box.
6. Enter the operator name of the hotspot in the
Operator name
text box.
7. Enter the E.164 Country Code for the WISPr Location ID in the
E.164 country code
text box.
8. Enter the SSID/Zone section for the WISPr Location ID in the
SSID/Zone
text box.
9. Enter the name of the Hotspot location in the
Location name
text box. If no name is defined, the name of
the IAP to which the user is associated is used.
Aruba Instant 6.5.0.0-4.3.0.0 | User Guide
Authentication and User Management |
175
