Aruba IAP-103 User Manual Download

Page: 41 / 437

Auto Run

—Allows you to configure a schedule for automatic execution of a support command for a

specific IAP or all IAPs.

Filter

—Allows you to filter the contents of a command output.

Clear

—Clears the command output that is displayed after a command is executed.

Save

—Allows you to save the support command logs as an HTML or text file.

For more information on support commands, see

Running Debug Commands on page 366

Help

The

Help

link allows you to view a short description or definition of the selected terms in the UI windows or the

dialog boxes.

To activate the context-sensitive help:

1. Click the

Help

link available above the Search bar on the Instant main window.

2. Click any text or term displayed in green italics to view its description or definition.

3. To disable the help mode, click

Done

Logout

The

Logout

link allows you to log out of the Instant UI.

Monitoring

The

Monitoring

link displays the Monitoring pane for the Instant network. Use the down arrow

located

to the right side of these links to compress or expand the Monitoring pane.

The Monitoring pane consists of the following sections:

Info

The

Info

section displays the configuration information of the VC by default. On selecting the

Network View

tab, the monitoring pane displays configuration information of the selected network. Similarly, in the

Access

Point

or the

Client

view, this section displays the configuration information of the selected IAP or the client.

Aruba Instant 6.5.0.0-4.3.0.0 | User Guide

Instant User Interface |

Summary of Contents for IAP-103






















































































































































































































































































































































































































































Search results

Summary of Contents for IAP-103

Reviews:

Related manuals for IAP-103

Brands by name

Popular brands

Aruba IAP-103, User Manual

Search results

Summary of Contents for IAP-103

Reviews:

Related manuals for IAP-103

Brands by name

Popular brands