GETTING STARTED
picasso
TM
PCI-3C
User Manual
- 7 -
1.3
I/O connectors
Figure 1
1.3.1
Video sources
The
picasso
TM
PCI-3C supports two RGB video sources or six B&W. The
picasso
TM
PCI-3C
pro
supports two RGB, six B&W, or four CVBS (composite colour) video sources. The selection of
the different video inputs is software controlled.
The green LED (D1) [see Figure 1] indicates locking of the frame grabber on an incoming video
signal.
When the green LED is flashing it indicates an error condition:
-
Video input signal doesn’t contain sync timing.
-
Wrong selection of video standard (PAL instead of NTSC).
-
Wrong selection of sync input (sync on red instead of sync on green)
When the green LED doesn’t light-up at all, it indicates:
-
No video or sync signal.
-
Wrong video input-port selected (Y2 instead of Y1).
The green LED doesn’t indicate lock information when you capture CVBS video signals with
the
picasso
TM
PCI-3C
pro
.You can display or capture one camera at a time.
