7
ARZUM
Do not wash the bottle or its cap in the dishwasher. Clean the bottle and
cap frequently with water (max 40°C).
INSTALLING THE SODA MAKER BEFORE
FIRST USE
1) Tilt and remove the Pet Bottle from the appliance.
2) Hold the head of the appliance and slightly rotate
anticlockwise to to open the head.
3) Remove the cup protector from the CO₂ gas cylinder
head and check and remove if there is one more cup
connecting the cylinder holder. Before installing the CO₂
gas cylinder, carefully check the black sealing ring on the
cylinder holder.
4) If you find the black sealing ring is missing, you can
replace it with the accessorial spare sealing ring.
. Put the sealing ring into the cylinder holder.
. Press the sealing ring into position with your finger or
other useful tools.
5) Screw the cylinder on the appliance head tightly
with your hands and place it back on to the appliance
housing.
6) Rotate the head of the appliance until lock.
USING THE SODA MAKER
Make sure the Soda Maker machine, the Pet Bottle and
the CO₂ gas cylinder are well installed.
1) Fill the Pet Bottle with water up to the marked level and
screw it into the appliance.
2) Press the carbonate button for 2-3 seconds to
carbonate. You can press it again to have a more
carbonated drink.
3) Press the gas release button to release the gas until
a hissing sound is heard. The gas pressure must be
released to have the Pet Bottle loosen.
4) Unscrew clockwise the bottle from the appliance.
5) The carbonated water is ready to drink.
EN
