8
ARZUM
6) Don't add any flavour into water before carbonating.
Attention: A small amount of water may leak out when the pet bottle is
overfilled or when the carbonate button is pressed too long.
IMPORTANT INFORMATIONS
. The Soda Maker machine is compatible with most of the popular cylinders
in the market. But it should be checked with the CO₂ gas cylinder supplier
before using.
. Another brands' Pet Bottles can be used if they have same fitting. It's a
possibility that other brands pet bottles may not suit.
TROUBLESHOOTING
1) The Soda Maker machine does not carbonate.
. Make sure the appliance is in the upright position.
. Check the CO₂ gas cylinder, change it if empty.
. Press the carbonate button properly for 2-3 seconds. Repeat it 2-3 times
until you hear a continuous and clear hissing sound. Press the gas release
button to release the gas pressure. Start over by pumping even more
carbonic before unscrewing the pet bottle.
2) The Soda Maker machine continues to release gas after the carbonate
button is released.
. Do not remove the CO₂ gas cylinder or the pet bottle. Leave the appliance
in the upright position and don't touch the appliance until no more gas is
escaping.
. When no more gas is escaping, push the gas release button and unscrew
the pet bottle. Unscrew the CO₂ gas cylinder and change it with new one.
3) Water overflows from the pet bottle while carbonating.
. Check the water fill line.
. Don't press the carbonate button for too long. Press 2-3 seconds each
time only.
. A small amount of water may leak out when the pet bottle is overfilled or
when the carbonate button is pressed too long.