19
ARZUM
EN
you want to change to another programme, please press the
SET button.
Once the selected temperature is reached, the light will be fixed and you
will hear two beeps, indicating you may start ironing.
FILLING WITH WATER
•
Unplug the iron before filling the water tank.
The device is designed for use with tap water.
If the water in your area is hard or semi-hard
use mix tap water with distilled or demineralized
water purchased in stores, in the ratio 2:1 and
1:1 respectively (distilled water: tap water). Check
with your water supplier to determine the type
of water in your area.Never use 100% distilled
or demineralized, rain water, softened water,
scented water, water from other appliances such as refrigerators, air
conditioners, dryers or other types of home water preparation water.
•
Open the cover for filling.
•
Slowly pour water through the water inlet. Do not fill higher than mark
on the water tank, in order to avoid spilling out of water.
•
Close the cover for filling. The water tank should be emptied after each
use.
DRY IRONING
•
The steam iron can be used on the dry setting
with or without water in the water tank, it is best
to avoid having the water tank full while dry
ironing.
Set the “
MANUAL STEAM
” mode. Do not press
the motor activation trigger.
Select the setting best suited for the fabric to
be ironed.
CAUTION: If the steam iron has been used for a long
time, it is hot and there is no water. Do not refill it
with water until the steam iron cools down.
STEAM IRONING
1.
Set the temperature to the desired position in
accordance with the manufacturer’s label.
2.
The LED of the selected temperature will start
Summary of Contents for HEALTH TECH AR6018
Page 12: ...12 ARZUM ...
