22
ARZUM
TROUBLESHOOTING
Problem
Posible causa
Solución
The iron does not
heat up.
The “Sense Technol-
ogy” function
has been activated.
The iron is
set to stand-by.
Grip the handle of the
iron to re-start it.
The clothes tend
to stick.
The temperature of
the soleplate
is too high.
Select a lower tempera-
ture and wait until the
iron has cooled down.
Water drips out of
the soleplate
when using the
shot of steam
function.
You have pressed
the shot of steam
button repeatedly
without waiting for
5 seconds between
each press.
Wait 5 seconds between
each press of the shot of
steam button.
Excessive drip-
ping or steaming..
No proper closing of
“clean”
button.
Point the iron away from
the ironing area. Actuate
a few times the “clean”
button.
The motor does
not work.
1.The iron is not in a
horizontal position.
2.The soleplate is
heating up.
1.Use the iron in a hori-
zontal position.
2.Wait until the selected
temperature is reached.
Smoke comes out
when connecting
the iron for the
first time.
This may be caused
by the lubrication of
some of the internal
parts.
This is normal and will
stop aftera few minutes.
Deposits come
out through the
holes in the
soleplate.
Traces of lime scale
are coming out of the
steam chamber.
Carry out a cleaning
cycle (see “Self-cleaning
function” section).
Summary of Contents for HEALTH TECH AR6018
Page 12: ...12 ARZUM ...
