Page 29 / 49
11.4
Stop of the machine
Make sure that the machine stands on level ground before stopping.
Reduce the throttling to a minimum, before stopping the motor.
1.
For parking, the emergency stop on the remote control is activated.
2.
Activate the emergency stop/main switch at the machine and remove the key. Unless the
main switch is activated and locked, the machine will start beeping after 10 sec.
The machine begins to beep to remind the operator that he should remove the ignition of the
machine and as a safety precaution to prevent unauthorized persons from starting the machine.
If the motor has been working under heavy strain it is important to let the motor run idle for 2
min. before stopping it.
Warning
: Stop the motor immediately:
1.
if the motor revolutions are suddenly reduced or increased;
2.
if the colour of the exhaust gas changes;
3.
if you hear a sudden unusual sound;
4.
if the mower of the machine begins to shake/vibrate.
