PIPE SAW 380SP
4
◆ Stay alert.
Watch what you are doing and use common sense while working.
Carelessness will lead to accident or injury.
Do not operate the machine when you cannot concentrate on your work, e.g. when you are tired
or while under the influence of alcohol, medication or drugs. Otherwise, accident or injury may
occur.
◆ Do not abuse the power cord.
Never carry the machine by the cord or yank it from the socket.
Keep the cord away from heat, oil, grease, knives and sharp edges.
Wire the cord with care. Do not run the cord where it may be stamped, caught or damaged by
anything. Otherwise, you may get electrical shock or the cord may be shorted to cause a fire.
◆ Maintain the machine with care.
Keep the saw blade sharp and clean for better and safer performance.
If the saw blade used is worn, damaged or improper for an intended purpose, the motor and
machine will be overloaded. This may cause the machine to generate heat, emit smoke or cause
fire, or you may get injured.
Follow instructions for replacing accessories.
Inspect the power cord and plug before use. If damaged, have them repaired by our sales
representative.
Otherwise you may get electrical shock or the machine may be shorted to cause fire.
Keep handles dry, clean and free from oil and grease, which may lead to injury.
◆ Check damaged parts.
Before further use of the machine, a guard or other part that is damaged should be carefully
checked to determine that it will operate properly and perform its intended function.
Check the machine for alignment of moving parts, binding of moving parts, breakage of parts,
mounting and any other conditions that may affect its operation.
Do not use the machine when its plug and/or cord is damaged.
You may get electrical shock or the machine may be shorted to cause fire.
Do not use the machine if its switch does not turn it on and off.
A guard or other part that is damaged should be properly repaired or replaced by an authorized
service center unless otherwise indicated in this instruction manual.
◆ Store the idle machine tidily.
When not in use, machines should be stored in dry and high or locked-up place –out of reach of
children.
◆ Have your machine repaired by a qualified person.
Our products are in accordance with the relevant safety rules. Do not modify them.
Repairs should only be carried out by our sales representative.
Otherwise the machine may not show its performance or you may get injured.
◆ If any label applied to the machine, etc. has come off, always ask for a new
label and apply it in position.
WARNING
Summary of Contents for 380SP
Page 23: ...PIPE SAW 380SP 22 ...
