INSTRUCTIONS
EN
INSTALLAD IN CAR WFTFL
ISOFIX
Group I (9-I8KG)
Put the ISOFIX insert guide into the
two ISOFIX attachment points of
your vehicle
NOTE:The ISOFIX attachment points
am located between the surface and
the backrest of the vehicle seat
Press the ISOFIX button to pull
out the two locking arms from the
base bottom. Pull the locking arm
to and fro until you hear an audible
CLICK which indicates they am fully
engaged. And on both sides of the
locking arms’ button tum into green
safety color.
Pull out the top tether,and press the
reléase button, pull the top tether
long enough to hang
the latch on the back of the car seat.
Fixed the latch on the fixed point and
the position of the fixed point are
shown in the picture(one of the three
positions).Make sum the hook is
tightened up.
Group II, III (15-36KG)
NOTE: When you use this safety car
seat in group II, III, please remove the
5-point harness,sleeping pads refer
to Chapter 4.6
2
