9
Maintenance
• Ensure that the running belt is centered before and after every use.
• Periodically clean this product with a soft wet cloth. Do not use harsh chemicals. Allow to dry
completely before use.
• Periodically visually inspect moving parts for wear and tear. Repair or replace any that are
found before further use.
• In particular, periodically check the fasteners for looseness or damage. Tighten or replace as
needed before further use.
Belt Adjustment
Periodically, the running belt may need to be re-centered. To do this, start the treadmill
and adjust the speed to 3 km/h. If the treadmill is deflected to the left, turn the left bolt
clockwise until centered (fig. 1). If the treadmill is deflected to the right, turn the right bolt
clockwise until centered (fig. 2). To tighten the belt, turn both bolts clockwise (fig. 3). To
loosen the belt, turn both bolts counterclockwise (fig. 4).
fig. 1
fig. 3
fig. 2
fig. 4
Lubrication
Periodic lubrication of the running platform under the running belt may be required. To do this,
unplug the machine and pull the running belt upward, exposing the running platform. Add
enough oil such that it spreads over the whole area under the belt. Let it sit for 60 seconds and
then release the belt. Remove any excess oil.
