background image

 

 

11   

asberprofessional.com

 

 

 

     

 

 

 

 

 

 

 

 

      

asberprofessional.com

 

WARRANTY 

5.1 

 Limited Warranty 

ASBER warrants its new product(s) to be free from defects in material and workmanship for a period of one (1) year from the 
original date of installation not to exceed 15 months from date of shipment from our factory. Equipment sold and installed for 
residential use, or outside the continental US is excluded from this warranty. 

This warranty is 

limited to product(s) sold to the original commercial user. The liability of ASBER is limited to, at ASBER’s 

option, the repair or replacement of any part (ground shipping only) found by ASBER to be warranted herein. ASBER shall 
bear the normal labor charges for repair of replacement to the extent that such repair or replacement is performed within (2) 
two hours or up to 100 miles total of the office of an authorized service agency, within the continental US and during regular 
(straight time) hours. Travel outside of the (2) two hours or 100 miles, and any work performed at overtime or weekend rates 
would  be  the  responsibility  of  the  owner/user.  Defective  parts  must  be  returned  to  ASBER,  freight  pre-paid,  for  Warranty 
inspection. 

ASBER assumes no responsibility for any product not installed properly in accordance with the instructions supplied with the 
equipment by an authorized representative. Any equipment which has been modified by unauthorized personnel or changed 
from  its  original  design  is  not  covered  under  this  warranty.  Furthermore,  ASBER  assumes  no  obligation  for  any  product 
which  has  been  subject  to  misuse,  abuse  or  hard  chemicals.  Normal  maintenance  as  outlined  in  the  instructions  is  the 
responsibility of the owner-user and is not a part of this warranty. Normal parts wear and maintenance is also not covered by 
this  warranty.  This  warranty  is  in  lieu  of  any  other  agreement,  expressed  or  implied,  and  constitutes  the  only  warranty  of 
ASBER with respect to the product. 

This states the exclusive remedy against ASBER relating to the product(s) whether in contract or in tort or under any other 
legal, theory, and whether arising out of warranties, representations, instruction, installation or defects’ from any cause.  

ASBER shall not be liable whether in contract or in tort or under any other legal theory for loss of revenue or profit, or for any 
substitute use or performance or for incidental, indirect, special or consequential damages, or for any other loss or cost of 
similar type.  

Proper  installation,  initial  check  out,  air  shutter  adjustments,  or  normal  maintenance  such  as  lubrication,  adjustment  or 
calibration  of  controls  is  the  responsibility  of  the  dealer,  owner-user  or  installing  contractor  and  is  not  covered  by  this 
warranty. 
 

Parts warranty cover 

– ASBER warrants all new machine parts produced authorized by ASBER to be free from defects in 

material  and  workmanship  for  a  period  of  90  days  from  the Warranty  Commencement  Date.  If  any  defect  in  material  and 
workmanship  is  found  to  exist  within  the  warranty  period  ASBER  will  replace  the  defective  part  without  charge.  Defective 
parts become the property of ASBER. 

Warranty Exclusions

 

 
 Negligence or Acts of God. 
 

 

Thermostat calibrations after (30) thirty days from equipment installation due. 

 

Air and Gas adjustments. 

 

Adjustments to burner flames and cleaning of pilot burners. 

 

Failures caused by erratic voltages or gas supplies. 

 

Unauthorized repair by anyone other than an ASBER Authorized Service Center. 

 

Damage in shipment. 

 

Alteration, misuse or improper installation. 

 

If serial number has been removed or altered. 

 

Thermostats and safety valves with broken capillary tubes. 

 

Ordinary wear and tear. 

 

 

Summary of Contents for AECRB-12















Reviews: