7
asberprofessional.com
asberprofessional.com
OPERATION
3.1 General information.
3.2 Initial Pilot Lighting.
3.3 Lighting & Shutdown
3.1
General information.
Operation of this equipment must be performed by qualified or authorized personnel who have read and
are familiar with the functions of the equipment.
3.2
INITIAL PILOT LIGHTING
CAUTION
When lighting pilots and checking for leaks, do not stand close to the combustion
chamber
All ASBER appliances are adjusted and tested before leaving the factory, effectively matching them to
sea level conditions. Adjustments and calibrations to assure proper operation may be necessary on
installation to meet local conditions. Adjustments are the responsibility of the customer and / or dealer
and are not covered under warranty.
3.3
LIGHTING & SHUTDOWN
Tum all valves or thermostats to the OFF position.
Wait 5 minutes.
Turn main gas supply ON and light pilot valves(s)
Adjust pilot valve(s) screw counter clockwise more flame, screw clockwise less flame
Adjust pilot flame ¼ inch high.
Turn ON gas valve(s) to light main burner.
For complete shutdown, shut OFF gas valve(s) and turn pilot valve(s) adjusting screw
clockwise to shut off gas to the pilot(s).
WARINING
Hot oil and hot surfaces can cause severe burns. Use caution when operating the fryer.
Do not attempt to move the fryer filled whit hot oil or shortening.
Do not go near the area directly above the flue when fryer is operation.
Severe burns may be caused.
Drain hot oil in metal containers, do not use plastic buckets or glass containers.
