Alle rechten voorbehouden.
Niets uit deze uitgave mag worden verveelvoudigd, opgeslagen in een database of openbaar gemaakt, in enige vorm of op enige wijze, hetzij elektronisch,
mechanisch, opnamen, of enig andere manier, zonder voorafgaande toestemming van ASCGroup.
10
2.5
Use
Veilig gebruik
The roof edge protection is not intended for leaning against or sitting on.
After a fall into the net
After the fall protection has done its job, i.e. after every fall into the net, the fall protection must be
inspected again by a certified body.
Edge board
The toe board is incorporated into the net.
Security
After a job, never leave the roof edge unattended.
Relocation
A roof edge protection is movable per section. A section consists of 2 uprights and a net.
Please note:
•
Move the roof edge protection preferably with two persons.
•
Make sure that you are secured against falling at the edge of the roof.
•
Make sure that the
roof edge protection cannot touch overhanging cables or other objects
.
2.6
Chemical products
Before use, check that:
•
All parts are still present
•
All parts are still properly attached
•
All parts are free of large dents and/or cracks
•
There are any changes in the environment that may affect safe use
•
All locking clips are correctly in place and the couplings are closed
•
The net is free of tears and/or fraying.
Avoid contact with acids and chemical products. These can cause corrosion to
the aluminium, which can affect the strength of the aluminium.
Do not attach a winch, hoist or rope to the roof edge protection.
Never use an eaves guard near
non-insulated, electrical installations or machinery.
