2
PRESSURE
GAUGE
With the pump activated it will show 9 pressure bars.
With the pump deactivated, the pressure of the network will be marked, and in
the case that it is fed from an external tank it will mark 0 bars.
This is a double pressure gauge that show the pump pressure and the internal
steam boiler pressure
.
If the network pressure exceeds 6 bar pressure, it is recommended to install a
reducer at the entrance of the machine.
HOT
WATER
MIXER
It serves to adjust the water temperature of the infusions with the addition of
cold water from the network and its mixture with the hot water from the boiler.