50
If you need to exchange propellers, re-mount
them according to the following layout:
Be aware that there are clockwise
spinning propellers and counterclockwise
spinning propellers.
Always secure each screw with a thread
locker!
D.
EXCHANGING MOTOR RAILS
To ensure highest readiness of your system, we highly recommend having spare motor rails with you.
In case of small damages to the motors or propellers, you can easily exchange the complete motor
rail and be up again in minutes.
To disassemble a motor rail from the UAV,
follow these steps:
1.
Unscrew the two screws that hold the
motor rail plug in place.
2.
Carefully remove the motor rail plug. Do
not pull on the cable but on the plug!
3.
Unscrew the two feet that hold the motor
rail in place.
4.
Take a new motor rail and screw the two
feet to hold the motor rail in place. Make
sure to apply thread locker to the feet’s
threads.
5.
Carefully pull in the motor rail plug. Do not
pull on the cable but on the plug!
6.
Screw the two screws that hold the motor
rail plug in place. Tighten the screws only
finger tight.
