7
The high- and low-frequency unit can be connected as follows:
•
single-wired: one cable-pair from power-amp to low-frequency unit, one cable-pair from
low-frequency unit to high-frequency unit.
•
bi-wired: one cable-pair from power amp to low-frequency unit, one from the power
amp to high-frequency unit. This is recommended by ASCENDO.
•
bi-amped: one cable-pair from separate amps for low- and high-frequency unit.
Take care of connecting always the plus (red) terminal of your power amp with the plus (4 +
6 / red) terminal of the speaker.
5.
TOS-Unit
The conception of C8 RENAISSANCE utilizes a switch-able backfiring TOS-Unit. This Unit
optimizes spectral inhomogeneous decay times.
The system offers two complementary modes of operation:
Switch (8) in position AN
(Dipole)
•
4-way dipole diversity with TOS - Unit
Switch (8) in position AUS
(Hemisphere)
•
One-Point-Source with homogenous hemisphere diversity
6.
Cleaning
Clean the enclosure and stand of the ASCENDO C8 RENAISSANCE with a dry and soft cloth.
Don’t use water or other chemicals. Don’t touch the tweeter and the woofer.
