Assembly Instruction PLG7
Version 2.00
Page 7
5.
Setting up (assembly and adjustment) of the travel rails
Before attaching the travel rails to the wall or
stanchions, measure and adjust the distance A
between (upper) handrail and the (lower) rack.
You can find the A dimension in the provided
assembly drawing.
The A-dimension is measured 90° between the
inner side
of the handrail and the
inner side
of
the rack.
After completing the adjustment
tighten
all
bolts!
Re-check the A dimension again to be sure that it
hasn’t changed during tightening of the bolts.
90° to the rail
