Operating Manual PLK8
Version 2.08
Page 29
16.
Technical data sheet
Standard equipment
•
Fully automatic operation of safety bars and platform
•
Handrail and toothed rack drive rail made from stainless steel
•
Operating panel with modern sensor buttons
•
Gentle start, gentle stop and speed reduction in curves
•
Emergency call button and emergency stop button
•
Obstruction sensors mounted on all sides
•
24V-battery operation, recharger included
•
Anti-slip bumps integral on surface of platform
Space requirements
•
31 cm in folded position
Flexibility
•
Can be installed over several storeys with stations at each possible
•
The travel route can be subsequently extended if required in the future
Platform dimensions
(in mm)
•
800 x 800 / 800 x 750 / 800 x 700 / 800 x 650
•
900 x 800 / 900 x 750
•
1000 x 900 / 1000 x 800 / 1000 x 700
•
1210 x 830 / 1250 x 800
•
1300 x 800
Load capacity
•
225 kg
Standard
•
300 kg
(optional)
Operating angle
•
0
–
47°
Operating speed
•
0,11
–
0,15 m/s
Acceleration
•
The maximum effective acceleration under load does not exceed 2,5 m/s²
Noise level
•
The operational noise level of the lift does not exceed 63 dB (A)
Remote control options
•
Radio remote control
o
Lockable control box, mounded flush or direct on wall
o
Handheld mobile transmitter
•
Cable operated remote control
Colour options
•
Metallic silver RAL 9006
Standard
•
RAL-colours on request
(optional)
•
Stainless steel finish
(optional)
Materials
•
Lightweight, powder coated, steel-/aluminium construction
•
Supporting elements made from zinc-coated steel
•
Covering panels made from scratch resistant plastic (Standard)
Travel rails
•
Clean, stainless steel tubular upper handrail
•
Stainless steel tubular lower drive rail with welded toothed rack
