Product Manual
SECTION 4
VIRTUOSO 5460F
115057 REV L
23
4.9 Locking Rod Switch
The locking rod switch senses whether the lower platform gate has been locked by the
locking rod; the locking rod must lock the gate before the lift car has moved 2" [50 mm]
off the ground, or the lift car will stop. The switch is located in the front left corner of the
lift car, behind the skirt. The switch is of the normally open (NO) type, and can be
tested using a standard multi-meter.
To access the switch for testing or replacement, retract the upper left corner of the lift
car skirt while the lift car is on the ground. See Section 4.4 for detailed instructions on
retracting the skirt. To remove the switch, depress the switch tab on the lower side of
the switch and pull the switch out of its cutout in the mounting bracket. Refer to the
figure below for identification of components. Take care not to damage the locking rod
switch while removing it.
Summary of Contents for VIRTUOSO 5460F
