IRD1516 Tuner/ASI to IP Gateway
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 22 of 31
Parameter
→
SPTS Select:
From the menu on the left side of the webpage, click “SPTS Select” to display the interface
where users can choose 16 tuner input and 2 ASI input programs to output from IP (max 512
SPTS). (Figure - 13)
Figure - 13
Configure ‘Input Area’ and ‘Output Area’ with buttons in ‘Operation Area’. Instructions are as
follows:
: To enable/disable the CA Filter function. By clicking the box, users can filter the
input CA to avoid disturbing the device’s scrambling function.
: To enable/disable the PID remapping.
: To refresh the input program information.
: To refresh the output program information.
: Select one input program first and click this button to transfer the selected
program to the right box to output.
: Similarly, user can cancel the multiplexed programs from the right box.
Input Area
Output Area
Operation Area
