IRD1516 Tuner/ASI to IP Gateway
Solutions Provider for FTTx, RFoG and HFC www.ascentcomtec.com
Page 30 of 31
Ascent’s ISO9001 quality assurance system has been approved by the CQC organization. In
order to guarantee the products’ quality, reliability, and stability, all Ascent products have
passed extensive testing and inspection before being shipped out of the factory. The testing
and inspection scheme covers all optical, electronic, and mechanical criteria which have been
published by Ascent Communication Technology. To prevent potential hazards, please strictly
follow operation conditions.
Prevention measures
Install the device in a place with environment temperatures between 0 to 45 °C
Ensure good ventilation for the heat-sink on the rear panel and other heat-sink bores if
necessary
Check that the input AC voltage within the power supply working range and the connection is
correct before switching on the device
Check if the RF output level varies within a tolerable range if necessary
Check to see if all signal cables have been properly connected
Do not frequently switch on/off the device; the interval between every switching on/off should
be greater than 10 seconds.
Conditions needed to unplug power cord
Power cord or socket is damaged
Any liquid has flowed into the device
Any circumstance that might cause a circuit short
Device is in a damp environment
Device has suffered from physical damage
Device will be idle for a long period of time
After switching on and restoring to factory settings, device still cannot work properly
Maintenance needed
IRD1516 tuner to IP gateway
1pcs
User’s manual
1pcs
Grounding cable
1pcs
RF in and loop out cable
16pcs
Power cord
1pcs
