Configuring the
11
Trestle-and-Plank Scaffolding System
• Unlock all four
J-Locks
and slide out the
INNER SECTION
completely
.
• Set aside the two
OUTER SECTIONS
.
• Open the
INNER SECTION
into the A-Frame Ladder
configuration. This now becomes Trestle #1.
• Create Trestle #2 by taking the two
OUTER SECTIONS
and locking them together with two of the
J-Locks
. The
two outer
J-Locks
are not used (see Diagram 2).
90-Degree Ladder
• Position the ladder in the A-Frame Ladder configuration.
• Reduce the height on the rear section by one rung.
• Position the ladder against the wall.
• Always be sure to place the shorter side against the wall.
• Be sure the ladder is standing on a flat and level surface.
Diagram 2
Summary of Contents for MIGHTY MULTI
Page 1: ...OWNER S MANUAL...
Page 14: ...Replacement Parts 14...
