9
1. Make sure that your refrigerator is unplugged.
2. Pry the hinge cover up and off, remove the three
screws that secure the upper hinge to the door, then
remove the hinge.
3. Remove the freezer compartment door from the
cabinet.
4. Remove the two screws that secure the center hinge.
5.Remove the refrigerator compartment door.
6. Remove the four screws that secure the lower hinge to
the right side of the cabinet, then remove the hinge.
7. Remove the washer and nut that secure the pin shaft to
the right hole on the lower hinge, then remove the shaft
and pin screw
8. Insert the pin screw into the right hole and insert the pin
shaft into the left hole on the lower hinge,, then secure the
shaft with the washer and nut.
9. Install the lower hinge on the left side of the cabinet.
10. Remove the screw that secures the door stops from
the bottom right of the refrigerator compartment door, then
remove the door stops and install to the bottom left side.
11. Install the refrigerator compartment door.
12. Move the door bushing from the top right side of the
refrigerator door to the top left side of the door. And move
the left hole cover to the right side.
13. Remove screws and the center hinge screw hole plug
on the left side of the cabinet, then install in the screw
holes on the right side of the cabinet.
14. Install the center hinge to the left side with the two
screws you removed previously.
15. Remove the screw that secures the door stops from
the bottom right of the freezer compartment door, then
remove the door stops and install to the bottom left side.
16. Install the freezer compartment door.
17. Move the door bushing from the top right side of the
freezer door to the top left side of the door. And move the
left hole cover to the right side.
18. Remove the screw that secures the hinge screw hole
cover from the top left side of the cabinet, remove the
cover and secures the cover on the top right side of the
cabinet.
