TD 92639GB
2009-12-08/ Ver. C
Configuration Manual
Ascom d62 DECT Handset
12
4.7.1
Data included in a replacement transfer
The following data is replaced during a replacement with IMS2:
• User parameters (including User ID)
• Contacts (entered by the user)
Note that the following data is
not
replaced:
• DECT registration
• Call list
• Messages
• Bluetooth pairing list
• Company phonebook
• Downloaded Language
• Licenses
1
4.7.2
Handset replacement with IMS2, Scenario 1
Note:
If the handset shall be subscribed towards an IP-DECT system, the IP-DECT software
version must be 3.1.X or higher. If that is not the case, use Scenario 2.
Note:
The handset to be installed must not have any previous valid registrations. If it has a
valid registration, unsubscribe the handset or use Scenario 2.
1
Subscribe the new handset with the same extension number as the old handset.
During the subscription procedure, the IMS2 identity (User ID) will automatically be
set to be the same as the extension number.
Note:
The User ID can be viewed in the handset by navigating to the menu
Admin menu > Device info > User ID
2
Insert the handset into a desktop charger or rack charger connected to IMS2 (not
needed if an over the air connection is used). Navigate to the Numbers tab in IMS2
Device Manager.
The new handset now has the same User ID as the old handset. It will automatically
be synchronized and data and parameter settings from the old handset will be
transferred to the new handset.
The synchronization will take a while if the Contacts in the original handset
contains a large number of contacts.
1. A handset’s product license (for example, d62 Messenger) and feature license(s) can be moved using the Move license
function in the IMS2.