TD 92639GB
2009-12-08/ Ver. C
Configuration Manual
Ascom d62 DECT Handset
24
• Number for automatic call after alarm
Determines which number the handset automatically shall call after an alarm is sent
Information about the handset’s location can also be sent along with an alarm, see
5.13
Base station positioning
on page 21 and
5.14
DECT Location
on page 21.
5.19 Interactive Messaging and IM parameters
This feature only works in d62 Messenger and Protector, not in Talker.
IM parameter settings can be set, and for the current version of parameter definitions,
they are found at:
Settings > Messaging
Examples of parameters are:
• Text size
• Time to Read (TTR)
Sets how long a message is shown in the display.
• Message List representation
Can be set to text or number.
• Repeat Message Indication
This parameter enables/disables message indications. It sets whether a message
indication shall be repeated until confirmed by the user or not. The current repetition
rate is 7 seconds. If the message itself contains a repitition, it overrides this setting.
• IM Option Mode
This parameter is used for older applications and sets that three soft keys shall be
placed automatically, i.e. on softkeys or in an option menu (list).
5.20 Broadcast and Multicast Messaging
This feature is supported by d62, but no parameter settings are possible.
5.21 Services
Note:
This feature works in Messenger and Protector only.
From PDM/IMS2, it is possible to configure up to ten services that can be reached from the
Services menu. It is also possible to configure soft keys to reach services quickly.
In a template or Number, the settings are done under Services.
In the current version, the following services can be configured:
• Phone Call
• Send Data
• Send Message
• Edit Alarm Data
This feature only works in Protector.
5.22 Protect registration from user deletion
It is possible to protect or unprotect a registration from deletion via the handset menu by
altering the parameter “Protected flag”. In a template/Number in PDM/IMS2, the