TD 92675EN
9 December 2011/ Ver. D
Configuration Manual
Ascom i62 VoWiFi Handset
21
Factory Reset using Handset
It is possible to factory reset a VoWiFi Handset from its Admin menu.
1
To activate the Admin menu, select Menu > Settings and enter 40022.
2
Select “Factory Reset“.
3
A
Reset portable?
window appears, press “Yes“. The VoWiFi Handset will be
restarted.
5.2
Replacement of VoWiFi Handsets
A VoWiFi Handset can be replaced with a spare VoWiFi Handset if it is broken. The VoWiFi
Handset registered in PDM or IMS3, is associated with its device type, device ID and
extension. During the replacement procedure, the broken VoWiFi Handset’s device type and
extension will be associated with the spare VoWiFi Handset’s device ID.
5.2.1
Replacement Procedure Choice
•
If you have IMS3 and already have applied the network template to the spare VoWiFi
Handset(s) to log on it later on, see
5.2.2 Replacement of Handset with IMS3
.
•
If you have both PDM and IMS3, and need to apply the network template to the spare
VoWiFi Handset(s) to log on it later on, see
5.2.3 Replacement of the Handset with PDM
and IMS3
.
•
If you only have PDM, see
5.2.4 Replacement of Handset with PDM Only
.
Data included in a replacement transfer
The following data is replaced during a replacement:
•
User parameters
•
Contacts (entered by the user)
Note that the following data is not replaced:
•
Call list
•
Messages
•
Company phonebook
•
Downloaded language
•
Certificates
•
Licenses
1
5.2.2
Replacement of Handset with IMS3
There are two different replacement procedures as follows:
•
If the broken VoWiFi Handset and the spare VoWiFi Handset have the same device type
and functionality license, see
Replace without Move Licenses in IMS3
.
•
If the broken VoWiFi Handset and the spare VoWiFi Handset have not the same device
type and/or functionality license. The license must be moved to the spare VoWiFi
Handset, see
Replace and Move Licenses in IMS3
on page 22.
1.
A VoWiFi Handset’s license(s) can be moved to an unlicensed VoWiFi Handset (Talker) if following the replacement
instructions in
Replace and Move Licenses in IMS3
on page 22.