TD 92675EN
9 December 2011/ Ver. D
Configuration Manual
Ascom i62 VoWiFi Handset
24
In order to move the licenses to the spare VoWiFi Handset, it must be an unlicensed Talker.
To check that the VoWiFi Handset is unlicensed, press *#34# in idle mode and select
“License“ . Only
i62 Talker
must be displayed here.
1
Make sure that the broken VoWiFi Handset is saved in the Device Manager (indicated
by a
in the
Saved
column. If not, in the
Numbers
tab, right-click the broken VoWiFi
Handset and select “Save“.
2
Switch off the broken VoWiFi Handset to make it offline.
3
Open the PDM.
4
Put the unlicensed spare VoWiFi Handset (Talker) in the DP1 cradle.
5
Run the template with the basic network settings containing (see
4.4 Configure a
Handset with a Template
on page 12):
•
Network settings
1
(located under Network > Network A, B, C, or D)
•
VoIP settings
2
(located under VoIP)
•
Unite settings
3
(located under Device > Unite)
6
Remove the VoWiFi Handset from the DP1 cradle. The VoWiFi Handset is restarted.
7
Enter the number and the password
3
(if any). Press “Login”.
8
Make sure that the spare VoWiFi Handset is saved in the Device Manager (indicated
by a
in the
Saved
column. If not, in the
Numbers
tab, right-click the spare VoWiFi
Handset and select “Save“.
9
Switch off the spare VoWiFi Handset to make it offline.
10
Switch on the broken VoWiFi Handset to make it online.
11
In the Device Manager, select the “Licenses“ tab.
12
Right-click the broken VoWiFi Handset and select “Move license...“.
13
In the
Move license
window, select the Talker that should receive the license. Press
“OK“.
14
The broken VoWiFi Handset restarts and has now become a Talker. Switch off the
broken VoWiFi Handset to make it offline in the Device Manager.
15
Switch on the spare VoWiFi Handset to make it online in the Device Manager.
16
In the Device Manager, select the “Licenses“ tab. Right-click the spare VoWiFi
Handset and select “Refresh“.
The spare VoWiFi Handset is automatically updated from the IMS3 and restarted. The last
stored settings and licenses for the broken VoWiFi Handset in the IMS3 has been transfered
to the spare VoWiFi Handset.
5.2.4
Replacement of Handset with PDM Only
Replacement via PDM is used in small VoWiFi systems or when IMS3 is not available.
•
If the broken VoWiFi Handset and the spare VoWiFi Handset have the same device type
and functionality license, see
Replace without Move Licenses using PDM
.
•
If the broken VoWiFi Handset and the spare VoWiFi Handset have not the same device
type and/or functionality license. The license must be moved to the spare VoWiFi
Handset, see
Replace and Move Licenses using PDM
.
Replace without Move Licenses using PDM
Both the broken VoWiFi Handset and the spare VoWiFi Handset must be of the same device
type and have same functionality license.