TD 92675EN
9 December 2011/ Ver. D
Configuration Manual
Ascom i62 VoWiFi Handset
46
6.8
Alarm Settings
Note:
Applicable to Protector only.
The following alarm types can be configured; Push-button alarm, Test alarm, Emergency call
alarm, Man-down and No-movement alarm.
6.8.1
Common Alarm Settings
These settings are common for all alarms sent from the VoWiFi Handset.
1
Select Alarm > Common.
2
In the
Stored alarm data
field, enter data to be sent along with an alarm (optional).
3
In the
Indicate initiated Alarm
drop-down list, select one of the following:
•
On - The VoWiFi Handset will beep and the LED will flash twice when an alarm is
initiated.
•
Off - The VoWiFi Handset will not indicate when an alarm is initiated.
4
In the
Disable backlight during alarm
drop-down list, select one of the following:
•
Yes - The display backlight will be left unchanged for 30 seconds after alarm
•
No - The display will light up after an alarm.
6.8.2
Push Button Alarm
1
Select “Alarm“.
2
Select “Multiple-press“ or “Long-press“.
3
In the
Alarm type for multiple press
drop-down list or
Alarm type for longpress
drop-
down list, select “Push button alarm 1“.
4
In the
Number for automatic call after alarm
field, enter the number to be called after
an alarm has been activated (optional).
5
In the
ALS
drop-down list, select “Yes“ if an Acoustic Location Signal shall sound
when the alarm has been activated.
6
In the
Text indication for alarm on multiple press
field or
Text indication for alarm on
long press
, enter the text to be displayed in the VoWiFi Handset when the alarm has
been activated.
7
In the
Mode for automatic call after alarm
drop-down list, select one of the following:
•
Monitor - The loudspeaker is muted and the microphone is on.
•
Loudspeaker - The loudspeaker is turned on.
•
Ordinary - The loudspeaker is turned off.
6.8.3
Test Alarm
1
Select “Alarm“.
2
Select “Multiple-press“ or “Long-press“.
3
In the
Alarm type for multiple press
drop-down list or
Alarm type for longpress
drop-
down list, select “Test alarm“.
4
In the
Number for automatic call after alarm
field, enter the number to be called after
an alarm has been activated (optional).
5
In the
ALS
drop-down list, select “Yes“ if an Acoustic Location Signal shall sound
when the alarm has been activated.