TD 92675EN
9 December 2011/ Ver. D
Configuration Manual
Ascom i62 VoWiFi Handset
52
3
If the downloaded language is selected, it might be needed to select matching
characters as text input language, and the sort order in the phonebook
In the
Input Language
drop-down list, select the text input language to be used.
Note: This parameter is only applicable for the downloaded language and cannot be
changed by the user. See
6.5.11 Uploadable Language
on page 39 for more
information.
6.10.3 Dialling Tone Pattern
Defines which tone pattern to use when dialling.
1
Select Audio > General.
2
In the Dialling tone pattern drop-down list, select the applicable region.
6.11 Display
6.11.1 User Display Text
Defines a text to be shown in the display in idle mode instead of the endpoint ID. If nothing
is entered in this text field, the endpoint ID will be shown.
1
Select Device > Settings.
2
In the
User display
text field, enter the text to be displayed.
6.11.2 Font style
The display font style can be changed to bold for increased readability.
1
Select Device > Settings.
2
In the
Font style
list, choose Normal or Bold.
6.11.3 Backlight Timeout
Numbers of seconds before the backlight is turned off.
1
Select Device > General.
2
In the
Backlight timeout
field, enter number of seconds before the backlight is turned
of when VoWiFi Handset is idle.
6.11.4 Brightness
1
Select Device > Settings.
2
In the
Brightness
drop-down list, select one of the following:
•
Normal - maximum backlight will be used.
•
Power save - reduced backlight will be used.
6.11.5 Screen Saver
1
Select Device > Settings.
2
In the
Screen saver
drop-down list, select one of the following:
•
Information - time and status (for example message indication) will be displayed
when the screen saver is activated.
•
Black - no information will be displayed when the screen saver is activated.