INSTALLATION GUIDE
Card Reader (NUCR-HE)
For the tamper switch to function, the module should be mounted right on the plastic plate.
The working distance of the switch is approximately 1mm (0.04 in).
8.
Place the two provided screw caps over the screw holes. Orient them correctly. The caps have a small
protrusion that fits neatly into the small indentation of the module, see detail below.
9.
Perform a test with an accepted card and verify that the LED and buzzer function correctly.
Only in a correctly configured system will a call or presence generate an alert on display
devices such as corridor lamps.
5
TD 93429EN / 18 March 2022 / Ver. C
