Ascotel® IntelliGate® 2025/2045/2065 as of I7.9
Operation and Maintenance
215
sy
d-
020
4/1.
7
– I7.
9
– 1
2
.2009
3.
Save the configuration data in the AIMS database with "
Tools
" - "
Download (PBX -
> PC)
".
4.
As a precaution make a backup of the AIMS database using "
Tools
" - "
Backup (PC
-> Disk)
".
5.
Backup voice data with "
Tools
" - "
Partial Download
" - "
Download wave files
":
– Specify the storage location and confirm by double-clicking or with "
Select
".
– Deactivate the check boxes "
Delete downloaded wave files from the system
"
and "
Prevent storage of audio data
".
– AIMS creates a new directory with the name of the PBX (e. g. PBX_1) using
"
Download
" and stores all the existing voice data in that directory.
6.
Replacing the Flash card: Carry out steps 2-7 as described in
.
7.
Replacing the RAM card: Carry out steps 3-12 as described in
.
8.
Initiate the upload process as described in the paragraph
. Select
"Start Now"
as the activation time.
Note: To upload the system software you first need to change the password in
AIMS once.
9.
Change the "
PBX generation
" in AIMS to I7.5.
Note: If the PBX generation is incorrect, AIMS cannot access the PBX after the
software upgrade and generates the corresponding error message.
10.
Load the saved configuration data using AIMS under
"Restore"
, and if necessary
save the data in the PBX with
"Upload"
.
11.
Load the voice files onto the PBX with
Tools
" - "
Partial upload
-
Wave files
-
Wave
file upload
":
– Select the directory where the voice data is stored (e. g. PBX_1) and confirm
with double-click or "
Select
".
– AIMS loads all the voice data back onto the PBX using "
Upload
".
12.
The PBX is ready for operation with the new system software I7.5 and the famil-
iar system configuration.
Notes:
– An I7.5 system software on a system with insufficient Flash and/or
RAM memory is unable to run, and outputs the corresponding error
messages. The system hardware has to be updated beforehand
using the "Update-Set".
