Ascotel® IntelliGate® 2025/2045/2065 as of I7.9
Installation
87
sy
d-
020
4/1.
7
– I7.
9
– 1
2
.2009
4. 6. 1
Direct connection
Direct connection is via quad two-conductor pillar terminal blocks. The pillar termi-
nal blocks are supplied with the PBX; they can also be ordered in packs from the
system supplier.
Suitable connecting wire:
•
Solid copper conductor
•
Conductor diameter 0.4 to 0.8 mm
Connecting the PBX
[1]
=Pin 1
[2]
The apertures above one another are electrically connected.
Fig. 36
Connecting and plugging in a quad two-conductor pillar terminal block
No tools are required to fit the connecting wires.
1.
Strip the connecting wires over 6-7 mm.
2.
Fit the connecting wires into the apertures on the pillar terminal blocks.
3.
Fit the prefabricated pillar terminal block onto the plug connector on the main-
board 2025/2045 or expansion card.
2)
Only if a second door intercom is being used.
3)
If all the functions of the first door intercom are being used.
4)
4 contacts blank
6-7
mm
1
2
3
4
1
3
4
2
[1]
[2]
haz1
112aaxxa0
