X-3D-BL User’s Manual
B User-programmable startup melodies
Your X-3D-BL is capable of playing preprogrammed
melodies directly after the initialization. To upload a
melody please connect the battery to the X-3D-BL,
turn it on and connect the USB adapter with your
computer and then with the X-Base.
Open the X-Control software and click on ”X-Base”.
Choose the correct COM-Port (normally ”Autoselect:
COMxx”) and click on ”Connect”. Chose ”X-BL Se-
tup” and click on ”start search”. After several seconds
four brushless controllers with different serial num-
bers should appear in the list. If all four controllers
have been found, click on ”Firmware upgrade”, then
on ”Select all controllers” and open the ”Select firm-
ware” dialog. Select ”X-BL Startup melody (.snd)”
on the lower right of the window and open any *.snd
file you like, for instance from the subdirectory ”X-
BL Sounds” in the X-3D-BL software package. Then
press ”Upload”.
After the upload is completed click on ”Finished” and
turn your X-3D-BL off and on again. After initiali-
zing it should play the new sound. Enjoy it! :-)
www.x3d-shop.de
- 36 -
www.asctec.de
