4
3.
Attach power cord to receptacle on
bottom of power supply housing (see
Figure 2, page 3) and plug cord into a
grounded electrical outlet.
NOTE:
The
ALU-40LED-CF Lamp features auto-
sensing, global voltage compatibility for
100VAC, 115VAC, 230VAC, and 240VAC
at 50Hz and 60Hz. The fuses provided
are correct for these line voltages.
NOTE:
A USA style 125V power cord and Euro
style 220V cord are shipped with the unit.
Power plug adapters for the specific
country of usage may need to be
purchased separately.
DC Power:
If the power source is 12VDC or 24VDC,
use the DC Battery Clip or Power Plug
Adapter Assemblies to connect to the DC
source (see Figure 3). Insert the
Assemblies' Power Plugs into the DC
Power Jack located on the bottom of the
power supply housing (see Figure 2, page
3).
NOTE:
When attaching the DC Battery
Clips (Figure 3) to the battery, connect
the red cable clamp to the positive (+)
terminal, and the black clamp to the
negative (-) terminal.
SETTING UP THE UNIT
- Cont'd
Fig. 3 - DC Power Accessories
DC POWER PLUG
ASSEMBLY
DC BATTERY CLIP
ASSEMBLY
