DESCRIPTION:
Versatility in tandem with portability make the Aseptico
ADC-01CS AseptiChair the perfect chair available to the professional for
positioning patients during a variety of healthcare activities - dentistry,
optometry, podiatry, etc. The chair is designed for comfort, safety, durability,
and portability. Please read the instructions provided below to receive the
best and longest service from your Aseptico equipment.
For further service contact:
P.O. Box 1548 • Woodinville, WA 98072-1548 U S A
www.aseptico.com • info@aseptico.com
(425) 487-3157 • (800) 426-5913
SETTING
UP
THE
CHAIR:
1. Remove the chair from its carrying case and set it on the floor, legs down,
in its folded position.
2. Rotate the chair up onto one side and remove the leg adjustment pins
from their storage pouch underneath the chair seat. (Fig. 1)
Fig.1
Fig.2
Warranty
Aseptico warrants its products against defects in material or workmanship for a period of two (2) years, from
date of original invoice. Some handpieces are warranted for one year under the same conditions. Other
handpieces and expendable components, such as air turbines and light bulbs, are covered by shorter
warranty periods, or have no warranty. Aseptico's sole obligation under product warranty is (at its sole
option and discretion) to repair or replace any defective component or product in part or whole. Aseptico
shall be the sole arbiter of such action.
In the event of alleged defect under warranty, the purchaser is to notify Aseptico's Customer Service
Department promptly. Customer Service will provide instructions, usually directing that the product be
returned for service. Shipment to Aseptico and the cost thereof is always the responsibility of the purchaser.
Accidental misuse, inappropriate installation, or failure to perform directed maintenance voids the warranty.
Aseptico does not assume, under this warranty, any risks or liabilities arising from the clinical use of its
products, whether or not such use involves coincidental utilization of products manufactured by others.
ADC-01CS ASEPTICHAIR
PORTABLE FIELD CHAIR
3. Standing in front of the chair, put your toe on one of the front chair legs
and lift up on the backrest and front seat portion. Raise chair seat to desired
height. Lock in place by inserting leg adjustment pins through chair leg tube
and into adjustment link on the right and left side of the chair. (Fig. 2)
LEG ADJUSTMENT
PINS
Insert Leg Adjustment Pin
COLLAPSING
THE CHAIR:
1. Fold toe and then leg sections onto seat as it was originally.
2. Pull arm slings out of the holes in the chair frame.
3. Put your toe onto one of the front chair legs and lift up slightly on the seat,
then remove height adjustment pins. While supporting chair weight, let the chair
fold down toward the floor.
4. As the chair folds down, release the backrest adjustment lever until the chair
collapses completely. Rotate the chair up onto one side and insert the leg
adjustment pins into their storage pouch underneath the chair seat.
NEVER
FORCE
THE
CHAIR
INTO
THE
COLLAPSED
POSITION.
FORCING
THE
CHAIR
DOWN
WITHOUT
RELEASING
THE
BACKREST
ADJUSTMENT
LEVER
MAY
BEND
THE
ADJUSTMENT
ASSEMBLY
AND
WILL
VOID
THE
WARRANTY.
5. Fold the arm slings and headrest onto the chair and place folded chair into
carrying case.
CLEANING
AND
MAINTENANCE:
Although bleach, when diluted to <10% and wiped clean immediately could be
used, it is not recommended. The use of barrier covers and mild cleaning
solutions is recommended as the primary asepsis approach on chair and stool
upholstery instead of relying on chemicals. The use of barriers greatly extends
the life of chair and stool upholstery and can be replaced between patients.
PRINTED IN USA
PN 420473
Rev C
ECO 13281
12/2014
ADC-01CS • Portable Dental Chair
NSN: 6520-01-446-3783
QUICK REFERENCE
AseptiChair
