2
SALIVA EJECTOR VACUUM
WATER COOLANT ON/OFF
TOGGLE SWITCH
WATER COOLANT
FLOW CONTROL
HANDPIECE SELECTION
TOGGLE SWITCH
SETTING UP THE UNIT
..Cont’d
IMPORTANT: For 110V-120V use, check that the
fuse in use is a 6.3A medium time delay; for
220V-250V use, check that the fuse is a 4A Slo-
Blo type. User may have to change fuses
before use.
For 220V-250V use, confirm that the power cord
is correct for the country of usage and carries the
proper certifications.
Carefully reinstall fuses into fuse holder and slide
holder back into selector module
(Figure 6)
. Apply
pressure until locking tab snaps back into
position, producing a distinct clicking sound.
WASTE
CONTAINER
CAVITRON WATER
OUTLET
HANDPIECE ON/OFF
TOGGLE SWITCH
TANK PRESSURE TOG-
GLE SWITCH
FOOT
SWITCH
WATER
SUPPLY
TANK
Fig. 5
Fig. 3
Fig. 4
Fig. 6
FUSES LOCATED
IN VOLTAGE
SELECTOR
MODULE
3-WAY
AIR/WATER
SYRINGE
HANDPIECE
CONTROLS
HOLDER BAR
AA-12CSB
BRACKET
VOLTAGE
SELECTOR
MODULE
& FUSE
HOLDER
LOCATION
SLIDING
PANEL
Fig. 7 (Rear View)
