13
AEU-1070-70V / AEU-1070
FUSE REPLACEMENT
WARNING
Switch off the power and unplug the unit
before following the steps below.
The system features auto-sensing global voltage compatibility.
The fuse indicated is correct for 100V-240V 50/60 Hz line
voltage.
1 .
Remove the fuse holder from the power inlet socket by prying
it out using two small blade screwdrivers, one on the top
A
and the other on the bottom
B
of the fuse holder.
A
B
2 .
Replace both fuses in the fuse holder with the same type and
rating:
5 x 20mm, 1 .6A, 250V slow-blow
.
3 .
Reinstall the fuse holder.
SYMBOL DESCRIPTIONS
Consult Instructions For Use
Type B Equipment
Caution – Consult Accompanying Documents
Alternating Current
Fuse Rating
Dangerous Voltage
Motor Direction
Preset Step Through
Torque Step Through
Pump On-Off/Step Through
Dispose Of Properly
Footswitch
Manufacturer
Ingress of Water - Classification-Footswitch
Protective Earth (Ground)
Temperature Limitation
Atmospheric Pressure Limitation
Humidity Limitation
Sterilize at 132°C (270°F)
Authorized European Representative
Serial Number
Part Number
ON-OFF Switch
Important information
