background image

2

AEU-1000-70V / AEU-1000

!

 SAFETY PRECAUTIONS

Aseptico accepts no liability for direct or consequential injury or dam-

age resulting from improper use, arising in particular through the 

non-observance of the operating instructions, or improper preparation 

and maintenance of this product.

To prevent injury to people and damage to property, please 

heed relevant warnings and remarks. They are marked as follows:

• WARNING

:  Serious injury or death may result if ignored.

• CAUTION

:  Damage to property or the environment may re-

sult if ignored.

• NOTE

:  Important additional information and hints.

WARNING: 

The system is supplied non-sterile! Before first use, 

and before each patient use thereafter, sterilize specified com-

ponents as recommended in the Cleaning, Maintenance and 

Sterilization section.

WARNING: 

Use for intended purposes only. Failure to observe 

the operating instructions may result in the patient or user suf-

fering serious injury or the product being damaged, possibly 

beyond repair. Before using this product, make sure that you 

have studied and understood the operating instructions.

CAUTION:

 Federal law restricts this device to sale by or on the 

order of a dentist.

CAUTION:

 Use of other dental accessories or sub-assemblies 

from third-party manufacturers is the sole responsibility of the 

user.

CAUTION:

 All repairs are to be performed by authorized service 

personnel only.

CAUTION:

 Always follow these guidelines when operating the 

unit:
•  Never touch drills, burs, files, or other handpiece tips when 

they are still rotating. 

•  The handpiece should only be attached when the motor has 

stopped running. 

WARNING: 

Do not install where there is a risk of an explosion. 

The system is not intended for operation in the presence of 

flammable anesthetics or gases.

WARNING:

 All handpieces have inherent inefficiencies that can 

lead to torque variations. Routine calibration is recommended, 

even if using the same handpiece or whenever a handpiece is 

changed. If further verification of torque accuracy is desired, 

then it is suggested that a torque wrench be used.

WARNING:

 Always comply with the handpiece and implant/

file manufacturers’ instructions regarding maximum speeds, 

torques, forward and reverse directions, and use of all instru-

mentation, drills, burs, etc., used in endodontics, implantology, 

and other oral surgery applications.

CAUTION:

 The irrigation supply system is designed for use with 

a saline solution or sterile water. For implants, use only suitable 

irrigants as recommended by the manufacturer’s instructions.

CAUTION:

 Connect mains power cable to a properly grounded 

outlet only.

CAUTION:

 The motor is sensitive to shock and may be damaged 

if dropped or impacted against a hard surface.

WARNING: 

Do not disassemble or alter the system motor, con-

sole, or foot switch. No modification of the unit is allowed.

CAUTION:

 Use only appliance cord Type C13, 10A per IEC / EN 

60320-1. Note: North America, Denmark, Australia, and New 

Zealand may require hospital grade plugs. Consult local codes.

WARNING: 

Do not use this device in conjunction with an elec-

tric scalpel or on patients with pacemakers.

CAUTION:

 Never connect or disconnect the bag spike to the 

irrigation bag over the console. Water spilled onto the console 

can damage the unit.

CAUTION:

 It is recommended to always have the patient wear a 

rubber dam during implant procedures.

WARNING:

 Using a different handpiece model from those rec-

ommended can cause significant under- or over-torque.

WARNING:

 Using the incorrect ratio setting can cause signifi-

cant under- or over-torque and under- or over-speeds.

WARNING:

 Do not position the unit so that the power cord is 

inaccessible for disconnection during use.

!!

DANGER

RISK OF EXPLOSION IF

USED IN THE PRESENCE OF

FLAMMABLE ANESTHETICS

 

Risque d’explosions’il est utilisé avec
les anethésiques inflammables

!!

This device has been tested and found to comply with the 

emissions requirements of IEC 60601-1-2:2001-09. These require-

ments provide reasonable protection against harmful electro-

magnetic interference in a typical medical installation. However, 

high levels of radio-frequency (RF) emissions from electrical 

devices, such as cellular phones, may disrupt the performance of 

this device. To mitigate disruptive electromagnetic interference, 

position this device away from RF transmitters and other sources 

of electromagnetic energy.

Information concerning the accuracy and precision of this product 

may be obtained upon request by contacting Aseptico at the ad-
dress shown on this page.

P.O. Box 1548, Woodinville, WA 98072

8333 216th Street S.E., Woodinville, WA 98072

Phone (425) 487-3157  •  Toll Free (800) 426-5913

Web:  www.aseptico.com 

Email:  info@aseptico.com

Summary of Contents for AEU-1000

















Reviews: