SYMBOL DEFINITIONS:
Type B
Equipment
Dangerous
Voltage
Attention - Consult
Accompanying
Documents
Type BF
Equipment
TABLE OF CONTENTS:
Introduction . . . . . . . . . . . . . . . . . . . . . . . . .1
Package Contents . . . . . . . . . . . . . . . . . . . .1
Setting Up the Unit . . . . . . . . . . . . . . . . . . .2
Operation Functions . . . . . . . . . . . . . . . . . .4
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Sterilization & Maintenance . . . . . . . . . . . . .7
Troubleshooting . . . . . . . . . . . . . . . . . . . . . .9
Warranty . . . . . . . . . . . . . . . . . . .Back Cover
5
EU Authorized Representative:
Advena Ltd.
Horsham RH12 2BT
United Kingdom
P.O. Box 1548
Woodinville, WA 98072
(425) 487-3157
(800) 426-5913
www.aseptico.com
Console Size:
5.5” x 5” x 2.5”
(9 cm x 13 cm x 18 cm)
Console Weight:
1.85 lbs (0.84 kg)
Power Source:
110 V or 220 V
SPECIFICATIONS:
Problem:
Console LED does not light when
turned on:
Console LED lights when turned
on, but handpiece does not turn:
Motor slowing down or sluggish:
Correction:
Check console to power connection.
Check that voltage is proper voltage.
Check motor plug connection.
Check foot switch connection.
Depress foot switch.
Check that an instrument is properly seated in the
handpiece and the collet is closed.
Dirty, under-lubricated handpiece.
Handpiece lubricant is running into motor.
After lubricating, set handpiece with head down to
let excess lubricant drain out.
TROUBLESHOOTING:
To prevent injury to people and damage to
property, please heed relevant warnings and
remarks. They are marked as follows:
WARNING:
Serious injury or death may
result if ignored.
CAUTION:
Damage to property or the
environment may result if
ignored.
NOTE:
Important additional
information and hints.
STERILIZATION &
MAINTENANCE:
CONSOLE -
The exterior of the console
may be cleaned by wiping with a soft cloth
moistened with mild detergent or
disinfecting solution.
HANDPIECES -
Thorough cleaning and
lubrication of handpieces after each use
and before sterilization is very important to
ensure proper operation and service life of
the handpiece. Follow the instructions
provided with the included handpieces for
complete maintenance instructions.
MOTORS -
The “E” Type brushless motor
included with this system is NOT
autoclavable.
The included motor/handpiece holding
cradle is fully autoclavable.
