Ashford KIWI 2 SUPER FLYER Instruction Manual Download

Page: 3 / 7

Real Scale Hardware List

Gently tap the lazy kate
pins into the lazy kate

base and locate the bob-
bins on them for storage
and plying. Stop tapping
when the pins reach the
bottom of the holes.

Squeeze and slide the

yarn guides onto the
flyer arms
Apply a drop of oil to the
flyer shaft and slide a
bobbin into position.

Summary of Contents for KIWI 2 SUPER FLYER

Page 1: ...eplace the item To validate our guarantee please visit our website or write to us Ashford Handicrafts Limited Factory and Showroom 415 West Street PO Box 474 Ashburton 7700 New Zealand Telephone 64 3 308 9087 Facsimile 64 3 308 8664 Email sales ashford co nz Internet www ashford co nz INSTRUCTIONS KIWI 2 SUPER FLYER KSF15022017V3 ...

Page 3: ... kate pins into the lazy kate base and locate the bob bins on them for storage and plying Stop tapping when the pins reach the bottom of the holes Squeeze and slide the yarn guides onto the flyer arms Apply a drop of oil to the flyer shaft and slide a bobbin into position ...

Page 4: ...up port with 19mm 3 4 screws Tap the nylon bearing down to the bottom of the hole in the rear flyer support Secure the front and back flyer supports to the maiden bar with 50mm 2 bolts and barrel nuts Note the holes in the maiden bar are closest to the rear flyer support x2 x2 ...

Page 5: ...he 50mm 2 bolt and barrel nut If required tap new wooden dowels into the holes in the top of the main upright Use the allen key to remove the original maiden bar and carefully store with the flyer bob bins lazy kate and drive band Insert the end of the flyer shaft into the rear flyer bearing and the flyer ori fice onto the front flyer bearing ...