N U M E R I C A L O C / E F P R O T E C T I O N R E L AY AD R 1 4 1 C / 2 4 1 C
ASHIDA Electronics Pvt. Ltd.
Ref: Manual / ADR141C / 241C
Issue: 04D
Date : 10.07.2014
Page
23/86
8.3 MENUS
8.3.1 Default
Display
After
Power ON
or when the HW RESET and LED RESET/EDIT push button is pressed
simultaneously, the relay will display the following message.
8.3.2
Main Menu List
Primary current
General Settings
Relay setting
Cold Load
Relay/LED Config
Trip Test
Fault 1
Fault 2
Fault 3
Fault 4
Fault 5
Fault 6
Fault 7
Primary Current, General Settings, Relay setting, Cold Load,
Relay/LED Config, Trip Test, Fault 1, Fault 2, Fault 3, Fault
4, Fault 5, Fault 6, Fault 7, Fault 8, Events Log, Error Log,
Status, Date/Time, and Secondary Current these are the
Main Menus
available in this relay.
Since the LCD Display consist only of 2 Lines, the main
menu list can be scrolled up or down by using the up arrow
key (
+ /
)
or the down arrow key (
- /
).
Ashida Digital
OC/EF Relay
This window will flash momentarily showing the following
Relay Name: OC/EF Relay
Then the control will go automatically to next window.
R = 0000 Y = 0000
B = 0000A
This is default window showing the actual Primary Load
Current as per
“CT Pri”
selection.
R = 0000 Y = 0000
B = 0000A
This is default window showing the actual Primary Load
Current as per “
CT Primary”
selection
Press the left arrow key (
) the relay will display Main menu
directly as follows.
ADR141C - Ver. 01.20
Unit ID : 0001
This window will flash momentarily showing the following
Relay Type : ADR141C Software Version : V01.20
Unit ID = 0001
Then the control will go automatically to default window
