PACKAGE
HOW TO REMOVE HEADSET
1. Helix Cuff
2. Wireless Headset
3. Earbud Tips: Small, Medium, Large
1. Press down on the cover near the end of the cuff to open the cover.
2. Take out the earbuds one by one.
3. Uncoil the cords from around the cuff.
4. Pull out the control unit from the cuff.
HOW TO INSERT HEADSET BACK
HOW TO WEAR
HEADSET
PAIRING
PAIRING WITH TWO DEVICES (SMART MULTIPOINT CONNECTIVITY)
1. Place the control unit back in the cuff.
2. Coil the cords around the cuff.
3. Place the earbuds into the correct position one by one.
The Helix Cuff and the headset are not waterproof.
Avoid excessive water on the headset.
For the best Bluetooth connection, keep source device in direct view of the
headset. The human body may interfere and weaken signal in some conditions.
4. USB Charging Cable
5. Cleaning Cloth
1
2
3
4
1
4
2
3
1. Pair and connect the headset with the first device.
2. Turn off the Bluetooth function of the first device.
3. Pair and connect the headset with the second device.
4. Reconnect first device with headset and both devices will be paired.
1
4
2
3
1
2
3
Wear Helix Cuff
on the wrist
Adjust to fit your wrist
by moving the magnet
Wear the headphones
on the head
5
CHARGING: Fully charge the headset before use with the microUSB charging cable.
POWER ON/OFF: Press the main button for 2 seconds until the LED indicator
flashes red 3 times.
Volume Up
Volume Down
LED Indicator
Micro-USB Charging Port
Mic
Main Button
4 sec
Helix Cuff Headset
Bluetooth
1. Press the main button for 4 seconds until the LED indicator blinks white
and red alternatively.
2. Select “
Helix Cuff Headset
” on your mobile device to connect via Bluetooth.
3. Once paired, the LED indicator will flash white.
2
3
1
OFF
ON
Device A
Device A
Device B
Device A
Press Down
