Page 9 of 43
P015-772
INSTALLATION
1.
Check that the control knob for the gas supply system
is turned to the
“OFF” position before starting any
assembly.
2.
Remove the burner cover (F) from body(C).
Note: Cover must be removed when burner is in operation.
3.
Remove door (E) from body (C) and place the propane
gas tank (not included) into the tank holder. Tighten
the preassembled wing screw clockwise to ensure
the propane tank is secure. Replace the door
(E)after the tank is connected to the regulator (see
below).